Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,186 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,414 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 924 part numbers: Electrical Control Products   HUBBELL 8,285 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.SuperBoltDirect.com	Email: sales@SuperBoltDirect.com	Phone: (888) 861-8777

 

SuperBoltDirect Online Order

Database Lookup:     By Part Number By Description
Total 48186 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   614  615  616  617  618  619  620  621  622  623  624  625  626  627  628  629  630  631  632  633  634
Part Number	Product Category	Description	Image	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-950MD-14A-0B-0C-C2-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-14A-0B-0C-C2-R  14A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"	-	0	0.00	1,420.20
AME-950MD-14A-0B-0C-C5D-SB	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-14A-0B-0C-C5D-SB  14A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C5D = 10 Pin STD - to 953D 6 Pin Euro Connector  SB = 304 Stainless Steel Boot   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,654.56
AME-950MD-14A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for LDT's  Model 950MD-14A-0B-0C-X-R  aka 950MD14A0B0CXR  Protects the LDT from physical & environmental damage  The housing and body are manufactured from 304 stainless steel  A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  The Front mount also has a Spherical Rod End by 1/2 Inch  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Ships in 3 Weeks  14A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Dated 1-19  (35LBS) H 6" L 20" W 6" Tube	-	0	0.00	1,453.68
AME-950MD-14A-1B-1C-C2-X	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-14A-1B-1C-C2-C2-X  14A = Active stroke in Inches  1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches  1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector and Mate on Side of Housing  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,204.20
AME-950MD-15.0A-0B-0C-X-X	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-15.0A-0B-0C-X-X  950MD15.A0B0CXX  Mill Duty Housing for Linear Displacement Transducers.  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.  The Front mount has a Spherical Rod End by 1/2 Inch.  Is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  15A = 12 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Ships in 6 to 8 Weeks, Peck MI  Dated 06-2022  (35LBS) H 6" L 22" W 6" Cardboard Tube	-	0	0.00	1,553.00
AME-950MD1550A-0B-0C-X-SB-RS-FS	Ametek Parts	Ametek Gemco Mill Duty LDT Housing 950MD  Part 950MD1550A-0B-0C-X-SB-RS-FS  950MD1550A0B0CXSBRSFS  950MD = Mill Duty Housing for LDT's  1550 - 155.0 Inch Active Stroke  0B = No Retract Overstroke  0C = No Extend Overstroke  X = Standard 1/2 inch NPT Conduit Fitting  SB = 304 Stainless Steel Boot   RS = Stainless Steel Rear Mount Spherical Rod End 3/4 Inch.  with 304 Stainless Steel Mounting Bolt.  FS = Stainless Steel Front Mount Spherical Rod End 3/4 Inch.  with 304 Stainless Steel Mounting Bolt  Ships in 10 Weeks, Peck MI  Dated 01-2024	-	0	0.00	4,268.64
AME-950MD-156-X-0B-0C-C3-X	Ametek Parts	Ametek Gemco 950MD Housing has been designed to protect the LDT from Physical and Environmental Damage.  Protection from Shock, Vibration, Dust / Debris, Temperature & Corrosives.  The 950MD consists of a 304 Stainless Steel Body, Barrel, Piston, Head and Trunnion Mount Bracket.  The 950MD offers a simple two point mounting scheme that can compensate for lateral and/or horizontal movement of the machine while in operation.  The Front Mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  Mounting Bolts are Provided for both the Trunnion Mount and Rod Ends in either standard steel or Optional Stainless Steel  Model 950MD-156A-0B-0C-C3-X  04A = 4.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on Side of Housing for  952A /953A w/connector option S only  X = No other options   (40LBS) H 4" L 164" W 4" Box  Motor Freight Only	-	0	0.00	1,731.24
AME-950MD-15A-0B-0C-C5A	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-15A-0B-0C-C5A  15A = Active Stroke in Inches  0B = 0 Inches of Overstroke / Fully Retracted   0C = 0 Inches of Overstroke / Fully Extended   C5A = Connector - 10 Pin STD - to 953A 5 Pin Euro  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,204.20
AME-950MD-15A-1B-1C-C2-B1-R-F	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-15A-1B-1C-C2-B1-R-F  15A = 15 Inch Active Stroke  1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches  1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector * Mate on the Side of the Housing  B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F   Protects the LDT from physical & environmental damage  R = Rear Mount, Spherical Rod End by 3/4 Inch  F = From Mount, Spherical Rod End by 3/4 Inch  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,833.84
AME-950MD-15A-1B-1C-C2-R-F	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-15A-1B-1C-C2-R-F  15A = 15 Inch Active Stroke  1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches  1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector * Mate on the Side of the Housing  Protects the LDT from physical & environmental damage  R = Rear Mount, Spherical Rod End by 3/4 Inch  F = From Mount, Spherical Rod End by 3/4 Inch  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,661.04
AME-950MD-16.5A -0B-0C-C2-B2	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-16.0A-0B-0C-C2-B2  aka 950MD16.0A0B0CC2B2  950MD = Mill Duty Housing for LDT's  16.0 - 16.0 Inch Active Stroke  0B= No Retract Overstroke  0C = No Extend Overstroke  C2 = Environmental MS Connector and Mate on the side of housing  B2 = Protective Boot  Silicone Coated Fiberglass -100F to +550F  Ships in 6 Weeks  Dated 1-19	-	0	0.00	1,788.48
AME-950MD-16.5A-0B-0C-C2-B2	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-16.5A-0B-0C-C2-B2  aka 950MD16.50A0B0CC2B2  950MD = Mill Duty Housing for LDT's  16.5 - 16.5 Inch Active Stroke  0B= No Retract Overstroke  0C = No Extend Overstroke  C2 = Environmental MS Connector and Mate on the side of housing  B2 = Protective Boot  Silicone Coated Fiberglass -100F to +550F  Ships in 7 Weeks  Dated 1-19	-	0	0.00	1,788.48
AME-950MD-16.5A-0B-0C-C3-B1	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-16.5A-0B-0C-C3-B1  16.5A = 16.5 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Inches Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on side of housing for 952A and 953A with connector option "S"   B1 = Protective Boot, Neoprene Coated Nylon, -60 F to +250 F   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,408.32
AME-950MD-168A-0B-0C-NC-L	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-168A-0B-0C-NC-L  950MD168A0B0CNCL  Ships in 3 Weeks  Dated 01-2020	-	0	0.00	1,760.40
AME-950MD-16A-0B-0C-C4-B1	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Model 950MD-16A-0B-0C-C4-B1  Part 950MD16A0B0CC4B1  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.   A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  The Front mount has a Spherical Rod End by 1/2 Inch.  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  16A = 16.0 Inch Active Stroke  0B = 0 Inch Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Inch Overstroke / Fully Extended Overstroke in Inches  C4 = Euro Connector on side of housing, 5 Pin, 12mm  B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F   A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  The Front mount has a Spherical Rod End by 1/2 Inch.  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  Ships in 10 Weeks, Peck MI  Dated 01-2023  (35LBS) H 6" L 30" W 6" Cardboard Tube	-	0	0.00	1,377.00
AME-950MD-16A-0B-0C-X-X	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-16A-0B-0C-X-X  16A = 16 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,085.40
AME-950MD-16A-2B-2C-X-B1	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-16A-2B-2C-X-B1  16A = 16 Inch Active Stroke  2B = 2 Inch Overstroke / Fully Retracted Overstroke in Inches  2C = 2 Inch Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B1 = Protective Boot. Neoprene coated Nylon, -60 to 250 Degrees F   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6" Tube  [Amazon]	-	0	0.00	1,341.36
AME-950MD-16A-B-C-C3-SB	Ametek Parts	Ametek Gemco Mill Duty Housing 950MD  Part 950MD-16A-0B-0C-C3-SB  950MD16A0B0CC3SB  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.   A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  The Front mount has a Spherical Rod End by 1/2 Inch.  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  16A = 16.0 Inch Active Stroke  0B = 0 Inch Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Inch Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on the side of the housing.  SB = 304 Stainless Steel Boot  A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  The Front mount has a Spherical Rod End by 1/2 Inch.  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  Ships in 10 Weeks, Peck MI  Dated 01-2023  (35LBS) H 6" L 30" W 6" Cardboard Tube	-	0	0.00	2,521.00
AME-950MD-17.7A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-17.7A-0B-0C-C-R  17.7A = 17.7 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,420.20
AME-950MD-18A-0B-0C-X-R	Ametek Parts	Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-18A-0B-0C-X-R  18A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  (35LBS) H 6" L 30" W 6"  [Amazon]	-	0	0.00	1,301.40

Prices are subject to change without notice. Last updated: 17-Aug-2025 06:51:03 AM (EST)

Application Information Requirements   In line with the manufacturer's requirements, Brake Products, Inc. is now obligated to obtain the following application information, before providing any fasteners inquiries/orders: What is the application? What is the required preload or what are they currently torqueing the nuts to? What is the operating temperature? Are there any space limitations? Attach any drawing or picture of the application. This is only the basic application information and more questions may follow depending on the application itself.

 

Secure Online Order   Secure Online Order   128 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Superbolt part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

What is a multi-jackbolt tensioner?   A "Superbolt" or "multi-jackbolt tensioner (MJT)" is a direct replacement for hex nuts, covered nuts, bolts, etc. They spin onto your existing bolt or stud and provide a better way to bolt up your joint. They consist of three components, shown above.   Click here to learn more

Superbolt Lube   Superbolt Lube   JL-M Moly-Disulphide Based Jackbolt Lubricant: JL-M MSDS   JL-G Graphite Based Jackbolt Lubricant: JL-G MSDS   Apply between Jackbolt Tips & Washer.   JL-G and JL-M Lubricant Certificate of Conformance   JL-G and JL-M Lubricant Shelf Life Letter

 

Nut-style tensioners Nut-style tensioners   Superbolt multi-jackbolt tensioners (MJTs) replace existing hex nuts. Only hand tools are required for installation and removal of any size tensioner. Safe, accurate and economical! We have a wide range of standard series, as well as an unlimited capacity to create special designs to meet your unique needs.

Bolt-style tensioners Bolt-style tensioners   Bolt style Superbolt multi-jackbolt tensioners (MJTs) replace existing studs or bolts. Ideal for applications with tapped holes, or where threading a stud into a nut would be impractical. The outside diameter is smaller than a nut type tensioner on a stud, allowing MJTs to fit into tighter areas.

Flexnuts Flexnuts   Flexnuts are used in combination with Superbolt tensioners and are designed to flex out at the bottom and flex in toward the top of the nut. This distributes the bolt load along many threads, adds elasticity, and prevents stress concentrations in the first few threads.

SMX Mill Motor Nuts SMX Mill Motor Nuts   SMX Mill Motor Nuts are used to replace standard mill motor armature nuts supplied by electric motor manufacturers. SMX tensioners are available for most standard motor frame sizes. Preload matches the hub stress capacity of brake wheels and pulleys.

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.