Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
  BRAKE PRODUCTS
48,186 part numbers: Brake Wheels & Discontinued Brake Parts
   GEMCO
14,414 part numbers: Motion Control Products
 
 		  GLEASON
18,097 part numbers: Cable & Hose Management Systems
   AERO-MOTIVE
3,226 part numbers: Cable & Hose Management Systems
 
 
 
 
 
  CUTLER-HAMMER
924 part numbers: Electrical Control Products
   HUBBELL
8,285 part numbers: Electrical Control Products
   SUPERBOLT
128 part numbers: Fastening Solutions
   RENOLD
408 part numbers: Mechanical Power Transmission Products
 
AUTOMATIC QUANTITY DISCOUNTS
 
 BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.
 
 Quotation is valid for 30 days and can be immediately converted into an order.
 
 
CREDIT TERMS CHANGES
 
  1. Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold.
  2. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.
 
Web: www.SuperBoltDirect.com Email: sales@SuperBoltDirect.com Phone: (888) 861-8777
 
SuperBoltDirect Online Order
Database Lookup:      
Total 48171 part numbers listed in this database. Shown in 2410 pages by 20 items.
Pages:   Prev,   Next,   174  175  176  177  178  179  180  181  182  183  184  185  186  187  188  189  190  191  192  193  194
Part
Number		 Product
Category		 Description Image Stock
Qty		 Weight
(lbs.)		 Price
(US$)		 Order
Quantity
AME-1980-104-X-SP-X-S-1-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-1-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
1 - Straight Drive Gear Reducer ratio 1:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-200-R Ametek Parts Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-200-R 
Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 
1 = NEMA 1 Rated Enclosure 
04 = 4 Independent Cams / Circuits / Switches  
The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand 
X = No Shaft Extension Opposite the Gear Box 
SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch 
X = No Timing Dial 
S = Straight Drive Gear Reducer 
200 = 200 to 1 Gear Ratio 
R = Right End Shaft Location 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-20-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-20-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
20 - Straight Drive Gear Reducer ratio 20:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-24-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-24-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
24 - Straight Drive Gear Reducer ratio 24:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-30-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-30-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
30 - Straight Drive Gear Reducer ratio 30:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-400-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-400-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
400 - Straight Drive Gear Reducer ratio 400:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-48-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-48-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
48 - Straight Drive Gear Reducer ratio 48:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-5-L Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-5-L 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
5 - Straight Drive Gear Reducer ratio 5:1 
Shaft Location: 
L - Straight Drive Gear Reducer Left End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-5-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-5-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
5 - Straight Drive Gear Reducer ratio 5:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-60-L Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-60-L 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
60 - Straight Drive Gear Reducer ratio 60:1 
Shaft Location: 
L - Straight Drive Gear Reducer Left End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-6-L Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-6-L 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
6 - Straight Drive Gear Reducer ratio 6:1 
Shaft Location: 
L - Straight Drive Gear Reducer Left End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-6-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-6-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
6 - Straight Drive Gear Reducer ratio 6:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-X-SP-X-S-8-L Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-8-L 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
X - No Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
8 - Straight Drive Gear Reducer ratio 8:1 
Shaft Location: 
L - Straight Drive Gear Reducer Left End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,562.00
AME-1980-104-Y-DP-R-X-R-48-R2 Ametek Parts Ametek Gemco Rotating Cam Limit Switch Model 1980-104-Y-DP-R-X-R48-R2 
Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 
1 = NEMA 1 Enclosure 
04 = 4 Independent Cams / Circuits / Switches 
Y = Shaft Extension Opposite the Gear Box, Dual Shaft 
DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch 
R = Rubber Boots on the switch plunger for additional dust & moisture protection  
X = No Timing Dial 
R = Right Angle Gear Reducer 
48 = 48 to 1 Gear Ratio 
R2 = Right End Gear Reducer Shaft Location 2 / Right Side Lower Postion / End View 1/15 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,707.00
AME-1980-104-Y-DP-X-S-4-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch 
Part 1980-104-Y-DP-X-S-4-R 
1980104YDPXS4R 
1980-104, NEMA 1, Circuits: 4 
Shaft Extension: 
Y - Shaft Extension Opposite Gear Box 
Switch: 
DP - Double Pole, Double Throw 
Timing Dial and Mounting: 
X - None 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
4 - Straight Drive Gear Reducer ratio 4:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End 
Ships in 3 Weeks 
Dated 01-2020 
(16LBS) H 8" L 18" W 12"		 - 0 0.00 2,857.00
AME-1980-104-Y-DP-X-S-5-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-5-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
Y - Shaft Extension Opposite Gear Box; 
Switch: 
DP - Double Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
5 - Straight Drive Gear Reducer ratio 5:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,857.00
AME-1980-104-Y-DP-X-S-60-L Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-60-L 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
Y - Shaft Extension Opposite Gear Box; 
Switch: 
DP - Double Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
60 - Straight Drive Gear Reducer ratio 60:1 
Shaft Location: 
L - Straight Drive Gear Reducer Left End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,857.00
AME-1980-104-Y-DP-X-S-60-R Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-60-R 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
Y - Shaft Extension Opposite Gear Box; 
Switch: 
DP - Double Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
S - Straight Drive; 
Gear Reducer/Multiplier Code: 
60 - Straight Drive Gear Reducer ratio 60:1 
Shaft Location: 
R - Straight Drive Gear Reducer Right End; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,857.00
AME-1980-104-Y-SP-X-R-1.5-R1 Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch 
Part 1980-104-Y-SP-X-R-1.5-R1 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
Y - Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
R - Right Angle; 
Gear Reducer/Multiplier Code: 
1.5 - Right Angle Gear Reducer ratio 1.5:1 
Shaft Location: 
R1 - Right end position 1 
Ships in 3 Weeks, Peck MI 
Dated 1-20 
(14LBS) H 8" L 18" W 12" Box		 - 0 0.00 2,435.00
AME-1980-104-Y-SP-X-R-5-R1 Ametek Parts Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-R-5-R1 
Base Part Number: 
1980-104, NEMA 1, Circuits: 4; 
Shaft Extension: 
Y - Shaft Extension Opposite Gear Box; 
Switch: 
SP - Single Pole, Double Throw; 
Timing Dial and Mounting: 
X - None; 
Gear Reducer: 
R - Right Angle; 
Gear Reducer/Multiplier Code: 
5 - Right Angle Gear Reducer ratio 5:1 
Shaft Location: 
R1 - Right end position 1; 
(14LBS) H 8" L 18" W 12" 
[Amazon] 
[1/2017] 
[1/2018] 
[1/2018]		 - 0 0.00 2,435.00
Prices are subject to change without notice. Last updated: 15-Aug-2025 06:59:45 AM (EST)
Application Information Requirements
 
 In line with the manufacturer's requirements, Brake Products, Inc. is now obligated to obtain the following application information, before providing any fasteners inquiries/orders:
  1. What is the application?
  2. What is the required preload or what are they currently torqueing the nuts to?
  3. What is the operating temperature?
  4. Are there any space limitations?
  5. Attach any drawing or picture of the application.
This is only the basic application information and more questions may follow depending on the application itself.
  
 
Secure Online Order

 
 Secure Online Order
 
128 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
 Enter at least three characters of a Superbolt part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
 Search scope:
This web site only
  
Formal PDF Quotation
 
 To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
 Your shopping cart is kept intact and you can still check out at a later time.
What is a multi-jackbolt tensioner?

 
 A "Superbolt" or "multi-jackbolt tensioner (MJT)" is a direct replacement for hex nuts, covered nuts, bolts, etc. They spin onto your existing bolt or stud and provide a better way to bolt up your joint. They consist of three components, shown above.
 
Click here to learn more
Superbolt Lube
 

Superbolt Lube
  
 JL-M
Moly-Disulphide Based Jackbolt Lubricant: JL-M MSDS
 
 JL-G
Graphite Based Jackbolt Lubricant: JL-G MSDS
 
 Apply between Jackbolt Tips & Washer.
 
 JL-G and JL-M Lubricant Certificate of Conformance
 
 JL-G and JL-M Lubricant Shelf Life Letter
 
Nut-style tensioners

Nut-style tensioners
 
 Superbolt multi-jackbolt tensioners (MJTs) replace existing hex nuts. Only hand tools are required for installation and removal of any size tensioner. Safe, accurate and economical! We have a wide range of standard series, as well as an unlimited capacity to create special designs to meet your unique needs.
Bolt-style tensioners

Bolt-style tensioners
 
 Bolt style Superbolt multi-jackbolt tensioners (MJTs) replace existing studs or bolts. Ideal for applications with tapped holes, or where threading a stud into a nut would be impractical. The outside diameter is smaller than a nut type tensioner on a stud, allowing MJTs to fit into tighter areas.
Flexnuts

Flexnuts
 
 Flexnuts are used in combination with Superbolt tensioners and are designed to flex out at the bottom and flex in toward the top of the nut. This distributes the bolt load along many threads, adds elasticity, and prevents stress concentrations in the first few threads.
SMX Mill Motor Nuts

SMX Mill Motor Nuts
 
 SMX Mill Motor Nuts are used to replace standard mill motor armature nuts supplied by electric motor manufacturers. SMX tensioners are available for most standard motor frame sizes. Preload matches the hub stress capacity of brake wheels and pulleys.
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
  ACH Form: Word   /   PDF
Supplier of Industrial Brake Parts Since 1985
 This web site: Owned and operated by Brake Products, Inc.
Designed and maintaned by Internet and Database Software, Inc.